This adaptor can be used to install a M10x1 VDO oil pressure sender on the oil filter flange. In many older VWs there is plenty of room for this t-fitting and the sending units. This t-fitting has many other uses as well. It can be used to free up a port for an oil feed line by installing two stock senders in this t-fitting. It can also be used to simply T the stock oil pressure sender and install an oil feed line and the sender in one port.

Fitting Details
M10x1 male threads
M10x1 female threads

Be sure the sending unit will physically fit in the area surrounding the port before purchasing this adaptor. If fitment will be too tight, check out our oil pressure relocation kits. Using our relocation kits multiple senders can be installed remotely from one port. Please see our tech corner for specific oil pressure sender installation instructions

VW 1/8" NPT Oil Pressure Relocation Kit
VW M10x1 Oil Pressure Relocation Kit
Tech Corner

This adaptor can be used to install an oil feed line in the stock VW M10x1 port. Please be aware of thread differences! This fitting has M10x1 female threads. Most aftermarket oil feed lines have 1/8" NPT male threads. Our M10x1 - 1/8" NPT adaptor needs to be used.

M10x1 Male - 1/8" NPT Female Adaptor